Delivery across the UK Free small samples – order online Showroom in Edinburgh

Wood Flooring Accessories

Stauf Multilayer 1K Wood Flooring Adhesive 18kg

£110.00 + VAT

£132.00 inc. VAT · free delivery

Size 18 kg bucket

  • Free UK delivery
  • Suitable for underfloor heating
  • EMICODE EC1 PLUS – very low emission, solvent-free
  • Approx. 15 m² per 18 kg bucket

STAUF MULTILAYER – 1-component elastic hybrid wood flooring adhesive, 18 kg bucket.

  • Type: 1K (one-component) elastic hybrid adhesive to ISO 17178 – water- and solvent-free
  • For: multi-layer / engineered wood flooring (DIN EN 13489) – planks, herringbone and chevron
  • Coverage: approx. 1,150 g/m² with a STAUF no. 5 notched trowel – about 15 m² per 18 kg bucket
  • Open time: approx. 30 minutes at 20 °C
  • Walk on / sand: after approx. 24 hours
  • Underfloor heating: suitable
  • Emissions: EMICODE EC1 PLUS (very low emission) · GISCODE RS 10
  • Colour: beige · Pack: 18 kg plastic bucket · Shelf life: 12 months

About STAUF MULTILAYER wood flooring adhesive

STAUF MULTILAYER is a one-component (1K) elastic hybrid adhesive made for gluing engineered, multi-layer wood flooring to the subfloor. There is nothing to mix: open the bucket, spread it with a notched trowel and lay the boards. It is water- and solvent-free, so it does not make the wood swell, and it stays elastically deformable once cured, which lets the floor move naturally with the seasons while staying firmly bonded. It is the type of adhesive we use for full-bond installations of engineered planks and engineered herringbone and chevron parquet.

Technical data

Product type1-component elastic hybrid wood flooring adhesive to ISO 17178
Solvents / waterWater-free and solvent-free – no wood swelling
Suitable flooringMulti-layer (engineered) wood flooring to DIN EN 13489
Suitable substratesConcrete C 25/30 (non-skid surface), cement screeds, calcium sulphate (flow) screeds, chipboard P4–P7, OSB/2–OSB/4, STAUF levelling compounds; mastic asphalt only after priming with STAUF VEP 195
ConsumptionApprox. 1,150 g/m² with STAUF notched trowel no. 5
Coverage per bucketApprox. 15 m² per 18 kg (at 1,150 g/m²)
Open timeApprox. 30 minutes at 20 °C
Ready to walk onAfter approx. 24 hours (depends on room climate and adhesive quantity)
Sanding / finishingAfter approx. 24 hours
Room climateMinimum 18 °C; relative humidity ideally max. 65%, never above 75%
Underfloor heatingSuitable
EmissionsEMICODE EC1 PLUS · GISCODE RS 10
ColourBeige
Packaging18 kg plastic bucket
Shelf life12 months
CleaningFresh adhesive wipes off easily; partly set residue with suitable STAUF cleaner (test first); hardened residue mechanically

Tips for a good bond

  • Check the subfloor is dry, level, firm and clean, and prime where the substrate needs it.
  • Let the room, the boards and the adhesive acclimatise – at least 18 °C and below 65% relative humidity is ideal.
  • Spread only as much adhesive as you can cover within the 30-minute open time, and press each board firmly into the bed.
  • Wipe away any adhesive on the floor surface straight away, before it starts to set.

Delivery and fitting

Delivered across the UK. Ordering a floor from us? Add the adhesive to your quote – we work out the number of buckets for your area. Our own team installs glued-down floors in Edinburgh, Glasgow, across Scotland and in London.

Questions about Stauf Multilayer 1K Wood Flooring Adhesive 18kg

How many square metres does an 18kg bucket of STAUF MULTILAYER cover?

About 15 m². STAUF gives a consumption of approximately 1,150 g/m² with a no. 5 notched trowel, so an 18 kg bucket covers roughly 15–16 m² depending on the subfloor.

What flooring is STAUF MULTILAYER for?

It is made for multi-layer (engineered) wood flooring to DIN EN 13489 – engineered planks and engineered herringbone or chevron parquet – glued directly to the subfloor.

Can STAUF MULTILAYER be used with underfloor heating?

Yes, STAUF lists it as suitable for underfloor heating systems.

How long before I can walk on the floor?

The floor can usually be walked on, sanded or finished after about 24 hours. Cooler rooms and thicker adhesive beds take longer.

Does it contain solvents or water?

No. It is a water- and solvent-free hybrid adhesive with the EMICODE EC1 PLUS very-low-emission rating, and it does not make the wood swell.

Planning the whole floor?

Tell us the area and rooms — we'll quote for supply, or supply & fitting, usually within one working day.

Request a quote

You may also like

Request a quote

Tell us the specification and the area, and whether you need supply only or supply and installation – we usually reply with an itemised quote within one working day.

  • Itemised quote for supply, or supply & fitting
  • Advice on grade, size and finish
  • Photos and drawings help us quote accurately

0131 385 7779

01What do you need?
02Photos & drawings optional
    03Your details

    18 kg bucket£110.00